Tuesday, February 28, 2012

This can't be happening. How is this happening?

Today was to be my day to work on my project for Lori Anderson's Bead Soup Blog Party. I got out my "soup" and my tools and thought briefly about a design. Actually it is a design suggested by Jim, but that is currently neither here nor there. I went through my dish of "orphans" and added a pink MOP ring about the size of a nickel to the plan. Jim left to do his errands and I was well on my way.


I was thinking how great it was to have some time alone in our cozy motorhome; just me, the flomar and my "stuff." It's an overcast day here at Tomoka State Park in Florida. The birds are singing and we are close enough to the Atlantic Ocean to catch the cool sea breeze through the open windows. Just delightful!

I decide to pickle and tumble some tiny sterling beads. I figure while they're in the pickle I might as well throw in some copper headpins that need freshening. After about an hour, I drain the pickle and there in the mix is a copper plated conical bead cap. Now how did that get in there? Mind you, it is not tiny. It is probably about two inches long. And the chemical reaction of the base metal under the plating has caused my sterling silver beads to become copper plated. Sigh. I polish the copper plate off the beads (by hand) and put everything in the tumbler.

I finish about one third of my project. I cut wire for the next segment which is going to use the MOP ring. It's gone. Where? I search my lap, the floor, my pockets. I search the table where I'm working, the counter tops, the bed. I take my seat apart, empty my tool box and the two carry-alls on the floor next to me. Then I search again. The good news is that I found $2. The bad news? Still no MOP ring.

I go back to the table to check my bead blanket for the third time to make sure my eyes aren't deceiving me. Yikes! The ring is still gone, but look what has appeared in its place.

It's a tiny brass resin-filled charm I made a couple of years ago. If you can't tell from the fuzzy photo, it says "true." Now I'm hearing the "Twilight Zone" song.

I decide this story is blog-worthy so I photograph the charm and transfer the camera card to the computer. I try to edit the photo and my software crashes but it won't go away. I try to begin the blog post but the computer shows I am no longer connected to the internet. I check the MiFi thingy and it shows a full battery charge and a full signal. ??? Time to restart both the laptop and the MiFi.

Meanwhile, as I'm going through this exercise, the inverter starts up and begins to beep. This is a piece of equipment in the motorhome that allows the use of electrical items (laptop, dremel, etc.) while the vehicle's motor is running and when the motorhome is not hooked up to an outside source of electricity. It was not on. The vehicle's motor isn't running. We are hooked up to the park's electric supply. There is no reason for the inverter to be on. It goes off then comes on again and begins beeping. No one near it, no one pressed the on button. I try to turn it off and it won't go off. I go sit down at the laptop and the inverter shuts off.

So here I am without my focal bead, with two extra dollars, and I'm wondering if 1:40 p.m. is too early for alcohol.

3 comments:

Amy F said...

That story is too funny! How strange!!!!

Lori Anderson said...

I love the story!

Pelima Jewellery Design said...

Gorgeous. It looks simply gorgeous.

Post a Comment